Collecting resources is crucial inRevenge of the Savage Planetbecause they can help you craft useful tools. Some resources, like carbon, are easy to spot since they appear abundantly on Xephyr. When it comes to finding a Printer Slurry, it can be a mixed experience.

Finding them can be easier to do since you can spot them outright, and can be picked up by doing certain missions. On the other hand, many are tucked away, giving you another reason to explore the planet. On top of showing where each Printer Slurry is on Xephyr, this guide will also go through how to unlock them.

Player looking at Printer Slurry crate covered in green goo in Revenge of the Savage Planet

Every Printer Slurry Location On Xephyr

While getting each Printer Slurry on the planet can help you build new gear, they can also lead you to a crate or two. So, it’s always a good idea to check the area where the Slurry is, because youmay find other thingsthat will probably be helpful as well.

Just like crates scattered around on Xephyr,there are 12 Printer Slurries to find. As mentioned, they can be a struggle to locate if you don’t know where to look.

Player looking at a Printer Slurry with black sludge around him in Revenge of the Savage Planet.

Pillars Of Turpitude

Printer Slurry 1

Getting this Printer Slurry is quite easy, but you’ll need todeal with a few enemiesbeforehand. Located in thesouth of Pillars Turpitude, you’ll find a Printer Slurryon a hill next to black sludge. As mentioned,deal with the enemies firstto unlock the Slurry.

Additionally, if youSurvey the area, you’re able to also find two crates nearby.

Player on the map of Revenge of the Savage Planet highlighting the location of the first Printer Slurry.

Printer Slurry 2

When you go beyond the teleporter and the crate located onthe far left sideof the black sludgein the Pillars of Turpitude, you’ll find a largecave opening behind the crate. Upon going through the small cave and getting to the other side, there will be another body of black sludge.

At the center, you’ll see another Printer Slurry. To get access to the middle stone formation, verify you have theHawx Rail Grinder upgradeso you can grind on the rails in front of the flat rocks. From there, you can easily get to the Printer Slurry.

Player at the location of the second Printer Slurry on the map of Revenge of the Savage Planet. Pillars of Turpitude is displayed on the right.

Once you land in its position,shoot three trigger points nearby. Simply follow thepurple cablessurrounding it to each endpoint.

After you get all three, the Printer Slurry unlocks.

Printer Slurry 3

When youhead directly northfrom the black sludge in Pillars of Turpitude, whereyou got the first Printer Slurry, you’ll end up in a canyon. By staying at thebase of the canyon, you’re able to locate a Printer Slurry.

It won’t be unlocked. To get the Printer Slurry, there will be an alien shooting out asubstance that can conduct electricity. Once the ground is covered in this purple-black material,lure an electric buginto the area. There should be one close by.

Players location selected on the map of Revenge of the Savage Planet. There is also a Pillars of Turpitude lable on the right.

Shoot it, and the Printer Slurry should open. However, if it doesn’t, make sure youtake down any enemiesin the vicinity as well.

The Frangipane Drifts

Printer Slurry 4

Slightlynortheast of the Pillars of Turpitude, you’ll enter this small region. The Printer Slurry in this area is locatedalmost in the centerand just behind a teleporter. Accessing the Slurry is done by the bugs nearby.

Use your baitand throw itnext to wherethe Printer Slurry is. There will be a small mushroom thatneeds to be charged. Once they are near the Printer Slurry and the small mushroom,shoot the bugs. This will cause them to electrify andcharge up the mushroom.

Player looking at locked Printer Slurry with a locked Teleporter in the distance in Revenge of the Savage Planet. There are small aliens infront of the player.

G’Nortt’s High Rise

Printer Slurry 5

On thesouthern border of G’Nortt’s High Rise, there will be Printer Slurry to unlock. This will probably be the one you miss (if you’re not surveying) because it’s almost out of sight.

Once you’re in the aforementioned spot, look for thehighest pillar in the area. There should also beveins going to it. When you reach the top, you’ll see a Printer Slurry locked away. Open it by following the veins andcharging their end points with the large mushroomsusing your Goo Ingestor upgrade.

Player’s postion of highlighted at the fourth Printer Slurry’s location on the map of Revenge of the Savage Planet. The lable for The Frangipane Drifts is on the right.

Afterall three veinsare charged and conducting electricity, the Printer Slurry opens up.

If you haven’t gotten the Goo Ingestor upgrade yet, ensure you check themany crates on Xephyrfirst to get all the parts.

Player with the fifth Printer Slurry with a ringed planet above in the background in Revenge of the Savage Planet. Below is a sandstorm.

Printer Slurry 6

Now, in thenorthern part of the G’Nortt’s High Rise, you’ll see acliff facing the Cactus Valleyregion. On the right side of the cliff,there will be a single path allowing youto climb upwardsusing the whip.

Once at the top, onthe opposite side of the cliff, the Printer Slurry will bebehind a magnetic wall. So, to access it, you must have done theMay The Fork Be With Youquestline first.

Player at the fifth Printer Slurry’s location on the map of Revenge of the Savage Planet. The lable for G’Nortt’s High Rise is on the right.

This quest will give you theMagnetic Fork,allowing you to break down the barrier.

Larval Roost

Printer Slurry 7

Assuming you’re following the storyline of May The Fork Be With You, it’ll take you toLarval Roots, located in the north of the planet. You can find a Printer Slurry in asmall nook on the right sideof the basin.

You should be able to see it if you’re coming from the Cactus Valley.

Player’s locaton highlighted on the map of the Revenge of the Savage Planet. There is also the lable for Cactus Valley on the right.

Cactus Valley

Printer Slurry 8

When you activate the teleporter on thewestern sideof this region,go behind it. This will lead you to anarrow pathwaythat goes toa large canyon. At the center, you’ll find a Printer Slurry.

It’ll be locked as you approach it. Opening it can be done byslaying all the large flying creaturesthat spawn from the eggs around the Printer Slurry.

Printer Slurry 9

Staying in Cactus Valley, make your way to thefar eastern part of the region. It should be almostbordering the Crystal Pillars region. Upon reaching this Printer Slurry’s location, you mustcharge up the three endpointsby following the veins.

Just like the Printer Slurry found in G’Nortts High Rise,you need the Goo Ingestorto conduct electricity to charge each vein that’s connected to the Printer Slurry. After that, it should open.

Crystal Pillars

Printer Slurry 10

This Printer Slurry can be tricky to access. When you head to themiddle section of the southern subregion of the Crystal Pillars, you’ll find an archway withgreen goo all around the entrance.

The interesting thing about this location is that it’s coveredin see-through materialthat you can’t get through. So, once you clean up the green goo with the Water Hose,follow the pathtaking you inside. However, as you go straight,take your first right.

You should see apurple alien-like plant. If you jump on the right side of it and into the see-through material, you can land in a little nook, allowing you todrop to the other side. Once you do, you get access to a Printer Slurry.

Caves Of Miranyth

Printer Slurry 11

The good thing about this Printer Slurry is that it’sfound along the waywhen doingtheMay The Fork Be With You questline. When you enter the cave by heading to theeastern section of the Great Oasis, you’ll need to get past a barrier.

It can be broken down bycharging up the veinsthat are below it. Use yourGoo Ingestor to connect the large electric mushroomto the veins to remove the barrier.

Once that’s gone, the Printer Slurry will beright in frontof the entrance.

Printer Slurry 12

For this Printer Slurry,you’ll also find it on the same quest. When you get past the barrier, follow the pathtill you reach a large open room. Bynavigating right, there will be acliff to jump onto. After you land, break down the wallthat’s in your way.

To remove the wall, use theBombegranate Grenade. Now, make your way into the small room and slay all the enemies nearby. The Printer Slurry will be on thefar right sideof the room.

However, it’ll also bebehind spiderwebs. Use your Goo Ingestor on the opposite side of the room toextract flammable ammo. Afterward, head back to the spiderweband burn it down.